ABSTRACT
Organic thin film transistors (OTFTs) are a promising technology for the application of photosensors in smart wearable devices. Light-induced electrical behavior of OTFTs is explored to achieve diverse functional requirements. In most studies, OTFTs show an increased drain current (ID) under light irradiation. Here, we use an ultraviolet (UV) light absorption top layer, tris(8-hydroxyquinoline) aluminum (Alq3), to improve the UV light response of poly(3-hexylthiophene-2,5-diyl) (P3HT)-based OTFTs. Unexpectedly, the Alq3-covered device operated at the accumulation mode demonstrates a decreased ID during the UV light irradiation. N,N'-Ditridecyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI, electron acceptor), pentacene (electron donor), and lithium fluoride (LiF, insulator) as an interlayer were inserted between the P3HT and the Alq3 layers. The PTCDI/Alq3-covered device also shows an unusual decrease in ID under the UV light but an increase in ID under the green light. The pentacene/Alq3-covered device shows an increased ID during the UV light irradiation and, unexpectedly, a memory effect in ID after removing the UV light. The LiF/Alq3-covered device exhibits an electrical behavior similar to the bare P3HT-based device under the UV light. Results of spectroscopic analyses and theoretical calculations have shown that the occurrence of charge transfer at heterojunctions during the UV light irradiation causes charge modulation in the multilayered P3HT-based OTFTs and then results in an unusual decrease or memory effect in ID. In addition, the unexpected ID reduction can be observed in the Alq3-covered poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene]-based OTFTs under UV light. The features, including opposite electrical responses to different wavelengths of light and optical memory effect, provide the multilayered P3HT-based OTFTs with potential for various optical applications, such as image recognition devices, optical logic gates, light dosimeters, and optical synapses.
ABSTRACT
Dual-gate organic thin-film transistors (DG-OTFTs) with enhanced functionality, including large current enhancement behavior, highly efficient threshold voltage controllability, and self-contained dual-mode logic gate features, are reported. These DG-OTFTs are based on a semiconducting/insulating polyblend-based active layer with asymmetric top and bottom charge modulation layers (atb-CMLs). The atb-CMLs are automatically generated through the preparation of multilayer stacks of phase-separated semiconducting poly(3-hexylthiophene) (P3HT):insulating poly(methylmethacrylate) (PMMA) polyblend layer, poly(vinylidene fluoride) (PVDF) layer, and cross-linked-poly(4-vinylphenol) (cPVP) layer. They consist of a thin PMMA bottom layer and an uneven-shaped PMMA:PVDF miscible mixture-based top layer. The presence of the polarizable insulating PMMA, PVDF, and PMMA:PVDF mixture regions causes the bottom and top CMLs to experience electrical polarization, which induces the dipole field to achieve efficient charge modulation functions in DG-OTFTs. Owing to the presence of atb-CMLs, the DG-OTFTs exhibit unprecedented electrical characteristics, such as the easy depletion of the bottom channel by the top gate potential. However, the top channel can work properly only when given a bottom gate potential (either positive or negative). Given these unusual electrical features, the design of the fundamental dual-mode logic gates (e.g., AND and OR gates) can be achieved with just one DG transistor. This finding opens an interesting direction for the preparation of DG-OTFTs with diverse operating modes and increasing functionality, thereby widening the application potential of such transistors.
ABSTRACT
Extracellular vesicles (EVs), membranous particles released from various types of cells, hold a great potential for clinical applications. They contain nucleic acid and protein cargo and are increasingly recognized as a means of intercellular communication utilized by both eukaryote and prokaryote cells. However, due to their small size, current protocols for isolation of EVs are often time consuming, cumbersome, and require large sample volumes and expensive equipment, such as an ultracentrifuge. To address these limitations, we developed a paper-based immunoaffinity platform for separating subgroups of EVs that is easy, efficient, and requires sample volumes as low as 10 µl. Biological samples can be pipetted directly onto paper test zones that have been chemically modified with capture molecules that have high affinity to specific EV surface markers. We validate the assay by using scanning electron microscopy (SEM), paper-based enzyme-linked immunosorbent assays (P-ELISA), and transcriptome analysis. These paper-based devices will enable the study of EVs in the clinic and the research setting to help advance our understanding of EV functions in health and disease.
